Alumina Bubble Brick

Other Refractories>Compound deoxidizer

Introduction

The product used the alumina hollow ball as the main raw material, high-performance powder as additives, and organic material from the temporary binding agent. After mixing, drying, forming, firing at high temperature shuttle kiln made. The material is widely used in carbon black furnace, gasifier, gas furnace, hydrogen furnace, as well as shuttle kilns and other high-temperature furnace equipment. Products, dimensions, physical and chemical indicators of useful life are up to customer requirements. The company produced lightweight insulation refractory material by its high purity, mechanical strength, and low thermal conductivity.

For physical and chemical indexes, click here.

For more products, click here.

Monoblock Stopper

Other Refractories>Monoblock Stopper

Introduction

Yilong’s stopper rods are made from alumina-carbon in isostatic presses with zirconia inserts and/or magnesia tips as necessary for optimum performance. Argon channels are likewise available to suit a particular operation. Stopper rods are all X-rayed before shipment to eliminate flaws and cracks. Stopper rods can be supplied bare or with mounting hardware as required.

For physical and chemical indexes, click here.

For more products, click here.

Tundish Impact Plate

Other Refractories>Tundish Impact Plate

Introduction

An impact plate formed from a refractory material for reducing the turbulence of a molten metal poured therein. The impact pad has a plurality of sidewalls, each sidewall having a plurality of spherically shaped portions. The spherically shaped portions disperse the molten metal in a variety of directions.

For physical and chemical indexes, click here.

For more products, click here.

Tundish Slag Dam

Other Refractories>Tundish Slag Dam

Introduction

The products are characterized by their high strength, good resistance to carrion and thermal shock and long service life. It can be effectively stabilization molten steel enter to mould, promote non-metallic inclusions in molten steel float, and improve the quality of steel.

For physical and chemical indexes, click here.

For more products, click here.

Sliding Mechanism

Other Refractories>Sliding Mechanism

Introduction

Use nodular cast iron as raw material The sealing height is only 110mm.The fan-shaped plate is equipped with two slide plate block. The moving fan-shaped case handle can make one of the slide plate cast hole in working, and make another one moving to the other space of the equipment. At the same time, the moving out slide block can be changed.

For physical and chemical indexes, click here.

For more products, click here.

Ladle Slide Gate

Other Refractories>Ladle Slide Gate

Introduction

Made by using sintered alumina and mullite as raw material, add in some of the carbon matrix components and anti-oxidant(such as aluminum, silicon metal, SiC, B4C, Mg-B and so on), adding binder pitch or phenolic resin mixed with coal Nerishige type, fired in a reducing atmosphere to form alumina oxide carbon refractories sliding gate plate.Slide plates fired at high temperatures cover Al2O3-C based, Al2O3-ZrO2-C based and MgO-spinel based, Our company supports the customer in flow control offering a range of ladle slide gate products. We have a wide range of refractory materials for achieving consistent and reliable high performance in all areas of slide gate applications. Balanced refractory life of plates, nozzles and well blocks enables a cost-effective operation.

For physical and chemical indexes, click here.

For more products, click here.

Electric Furnace Prefabricated Part

Other Refractories>Electric Furnace Prefabricated Part

Introduction

The essential thing with all prefab units is that their quality must be the same as the rest of the refractory structure. This demands innovative moulding techniques and strictly controlled use of monoliths, modern processing equipment and quality management and control. In their own two tunnel kilns and two batch kilns Gouda Refractories is also able to dry and fire the Prefab department's products at up to 1,680 degrees, so that a ceramic bond is created while baking.

For physical and chemical indexes, click here.

For more products, click here.